How to connect to dn42 using Mikrotik RouterOS
- 188.8.131.52 - peer external IP
- 184.108.40.206 - your external IP
- A private /30 range for the GRE endpoints: 192.168.200.128/30
- 192.168.200.129 - remote GRE IPv4 address
- 192.168.200.130 - local GRE IPv4 address
- fd42:c644:5222:3222::40 - remote GRE IPv6 address
- fd42:c644:5222:3222::41 - local GRE IPv6 address
- YOUR_AS - your AS number (numbers only)
- PEER_AS - peer AS number (numbers only)
- IPSec only supports IKEv1
- OpenVPN only works in tcp mode
- OpenVPN does not support LZO compression
- You can't use /31 subnet for Point-to-Point (PtP) links
Mikrotik/RouterOS can't handle very well /32 on Point-to-Point links (like GRE). There is a separate howto to explain how to setup /32 between in a GRE link (or even a OpenVPN). What is the easy way? Just use any /30 on the GRE Link, either from your assigned DN42 pool address or use a private address like 192.168. Please don't choose from 172.16.0.0/12 or 10.0.0.0/8 because they may overlap with DN42 or ChaosVPN.
RouterOS v7.2 has some nasty bugs when using PTP configuration or IPv6 link local addresses as NEXTHOP. It won't work (confirmed for v7.2 by their support staff).
First, let's add IPSec peer and encryption policy.
Peer most likely provided you with encryption details.
If not, ask them about it. Here we're gonna use aes256-sha256-modp1536
/ip ipsec peer add address=220.127.116.11 comment=gre-dn42-peer dh-group=modp1536 \ enc-algorithm=aes-256 hash-algorithm=sha256 local-address=18.104.22.168 secret=PASSWORD
/ip ipsec policy add comment=gre-dn42-peer dst-address=22.214.171.124/32 proposal=dn42 protocol=gre \ sa-dst-address=126.96.36.199 sa-src-address=188.8.131.52 src-address=184.108.40.206/32
Pretty straightforward here
/interface gre add allow-fast-path=no comment="DN42 somepeer" local-address=220.127.116.11 name=gre-dn42-peer \ remote-address=18.104.22.168
IPs inside the GRE tunnel
Your peer most likely provided you with IP adresses for GRE tunnel.
As I said before, you can't use /31 for PtP links, so, in the "easy way" we will be using /30. If you want to avoid wasting a whole /30 for your peering, please check the point-to-point configuration for RouterOS
Add the IP your peer provided you:
/ip address add address=192.168.200.130/30 interface=gre-dn42-peer network=192.168.200.128
Here we can use /127, so it's simple:
/ipv6 address add address=fdc8:c633:5319:3300::41/127 advertise=no interface=gre-dn42-peer
If you configured everything correctly, you should be able to ping
It's a good idea to setup filters for BGP instances, both IN (accept advertises) and OUT (send advertises)
In this example, we will be filtering IN: 192.168.0.0/16 and 169.254.0.0/16
OUT: 192.168.0.0/16 and 169.254.0.0/16, you really don't want to advertise this networks.
This filter will not only catch /8 or /16 networks, but smaller networks inside this subnets as well.
/routing filter add action=discard address-family=ip chain=dn42-in prefix=192.168.0.0/16 prefix-length=16-32 protocol=bgp add action=discard address-family=ip chain=dn42-in prefix=169.254.0.0/16 prefix-length=16-32 protocol=bgp add action=discard address-family=ip chain=dn42-out prefix=192.168.0.0/16 prefix-length=16-32 protocol=bgp add action=discard address-family=ip chain=dn42-out prefix=169.254.0.0/16 prefix-length=16-32 protocol=bgp
Now, if you want only DN42 connection, you can filter IN 10.0.0.0/8 (ChaosVPN / freifunk networks):
/routing filter add action=discard address-family=ip chain=dn42-in prefix=10.0.0.0/8 prefix-length=8-32 protocol=bgp
Now, for actual BGP configuration.
Let's add some peers. Right now we have just one, but we still need two connections - to IPv4 and IPv6
/routing bgp instance set default disabled=yes add as=YOUR_AS client-to-client-reflection=no name=bgp-dn42-somename out-filter=dn42-in \ router-id=22.214.171.124
IPv6 (if needed):
/routing bgp peer add comment="DN42: somepeer IPv4" in-filter=dn42-in instance=bgp-dn42-somename multihop=yes \ name=dn42-somepeer-ipv4 out-filter=dn42-out remote-address=192.168.200.129 remote-as=PEER_AS \ route-reflect=yes ttl=default
/routing bgp peer add address-families=ipv6 comment="DN42: somepeer IPv6" in-filter=dn42-in \ instance=bgp-dn42-somename multihop=yes name=dn42-somepeer-ipv6 out-filter=dn42-out \ remote-address=fd42:c644:5222:3222::40 remote-as=PEER_AS route-reflect=yes ttl=default
Also, as a note, Mikrotik doesn't deal well with BGP running over link-local addresses (the address starting with fe80). You need to use a fd42:: address in your BGP session, otherwise, BGP will not install any received route.
You want to advertise your allocated network (most likely), it's very simple:
You can repeat that with as much IPv4 and IPv6 networks which you own.
/routing bgp network add network=YOUR_ALLOCATED_SUBNET synchronize=no
Separate dns requests for dn42 tld from your default dns traffic with L7 filter in Mikrotik. Change network and LAN GW to mach your network configuration.
Since version 6.47 have added functionality that can redirect DNS queries according to special rules. If you used to do Layer-7 rules in the firewall, now it's simple and elegant:
/ip firewall layer7-protocol add name=DN42-DNS regexp="\\x04dn42.\\x01" /ip firewall nat add action=src-nat chain=srcnat comment="NAT to DN42 DNS" dst-address=172.23.0.53 dst-port=53 protocol=udp src-address=192.168.0.0/24 to-addresses=192.168.0.1 add action=dst-nat chain=dstnat dst-address-type=local dst-port=53 layer7-protocol=DN42-DNS protocol=udp src-address=192.168.0.0/24 to-addresses=172.23.0.53 to-ports=53
/ip dns static add comment=DN42 forward-to=172.23.0.53 regexp=".*\\.dn42" type=FWD