☰

Updated Bird communities (markdown)

dn42 wiki committed 2015-03-28 14:53:00 +0000 commit 75ce7ec613300a3965def6580bb4d85ff48463c9

				howto/Bird-communities.md
			
          @@ -6,7 +6,7 @@ The community is applied to the route when it is imported and exported, therefor

           The filter helpers can be stored in a separate file, for example /etc/bird/community_filters.conf.

          -Below, you will see an example config for peers4 based on the original filter implementation by Jplitza without any bgp_local_pref calculation. An example with bgp_local_pref calculation can also be found below.

          +Below, you will see an example config for peers4 based on the original filter implementation by Jplitza.

           To properly assign the right community to your peer, please reference the table below. If you are running your own network and peering internally, please also apply the communities inside your network.

...	...	@@ -6,7 +6,7 @@ The community is applied to the route when it is imported and exported, therefor
6	6
7	7	The filter helpers can be stored in a separate file, for example /etc/bird/community_filters.conf.
8	8
9		-Below, you will see an example config for peers4 based on the original filter implementation by Jplitza without any bgp_local_pref calculation. An example with bgp_local_pref calculation can also be found below.
	9	+Below, you will see an example config for peers4 based on the original filter implementation by Jplitza.
10	10
11	11	To properly assign the right community to your peer, please reference the table below. If you are running your own network and peering internally, please also apply the communities inside your network.
12	12